ADDITIONAL VERTICAL LOCK C-AD 114
It allows the application of two additional vertical closing points, one on the cremone bolt side and the other one on the hinge side. Materials made from black galvanized Zamak.
コ
Reviews (0)
Related products
cremone bolt handle C-AD 108
Aluminum die-cast cremone bolt, the zamak gears slide inside an acetyl resin guide, which also has slots for securing in the opening or closing positions. The cremone bolt is universal, can be reversed and has tow-possible center-to-center distances for securing to the profile. Comes with complete kit for the closing one winged window, consisting of tow- rod connection blocks for cremone bolt, tow- rod ends and tow-check plates, made from zamak. Finishing: painted in RAL colors
HEAVY DUTY HINGES C-AD 107
The heavy duty hinge is the most efficacious solution for the realisation of doors/frames of considerable dimension and weight. It can be entirely mounted on the pre-assembles frame, thanks to the fast adjustments in the three directions, made without the disassembling of the carters and the removing of the window leaf. This operation can be effected also by one person and is facilitated by the presence of immediately visible incisions. Hinges are available for different interaxes: 60-79
The base body of the hinge is made of extruded aluminium, cover-plate in die-casting aluminium, pivots in stainless steel, self-placing bushes and screws in galvanised steel, ferrules and plugs in nylon, fixing counterplates in extruded aluminium and the spring in galvanised steel.
Load capacity of 2 wings-150kg.
Finishing: painted in RAL colors
Prodaction tape
APPLICATIONS
Temporary protection of surfaces, during medium and severe mechanical transformations of the following materials: Brushed aluminium, ground or deep drawing stainless steel, matt painted coils and PVC profiles/plates.
Not suggested for Copper, brass and copper containing alloys. Not suitable for protection against corrosion, humidity or chemical solvents.
SUITABLITY
suitable for POWDER COATED ALUMINIUM PROFILES ADLER N-2R exhibits the special "EASY-PEEL" characteristics for the rapid removal of the film from high gloss to semi matt surface, such as glossy painted metals.
The removal Forces is inversely proportional to the speed of removal
OUTLINES
UNIT
Film type
polyethylene (LDPE) UV Treated 80 MIC Black / White, Black / Black
Average Thickness (A.S.T.M) Colour
Two Directional Lever Bolt C-AD 119 D
Applications
Two directional lever bolt extremely strong suitable
also on door of new design.
Characteristics
Useful travel 18mm With lever operation it is possible to transmit a force of up 180 kg to the rod.
It is flush-mounted and can accommodate indistinctly
sliding rods dia-meter 6mm or 8mm because it is already fitted with a dual threading diameter.
Parts supplied
2 black stainless steel 7P 1/2" flat head c/sunk screws.
Materials
Die-cast zamak body and lever hardened steel springs.
Finishing: Painted in RAL colors
Reviews
There are no reviews yet.