ALIGNMENT CORNER JOINT

Functions Fastening element to be applied directly onto the rods in the range. It permits adjusting the force of the pull by simply turning the eccentric part Technical features Simple and quick to apply by simply making a hole diam. 8mm on the rod. Permits making one or more supplementary fastenings on any frame. Offers the possibility of adjusting the force of the closing pull Materials Zamak base and pawl Stainless steel screws

Group of right and lift handed hinge made of aluminum, screws and pin are stainless steel Used for joint frame with opining shutter of door Capacity of 2 hinges 100kg Finishing: painted in RAL colors

Reversible lever handle fittable for internal/external, left/right installation to close top-hung and pivot - hung window, and hand reversal possible by swapping over the handle Finishes: painted in RAL colors.

APPLICATIONS Temporary protection of surfaces, during medium and severe mechanical transformations of the following materials: Brushed aluminium, ground or deep drawing stainless steel, matt painted coils and PVC profiles/plates. Not suggested for Copper, brass and copper containing alloys. Not suitable for protection against corrosion, humidity or chemical solvents. SUITABLITY suitable for POWDER COATED ALUMINIUM PROFILES ADLER N-2R exhibits the special "EASY-PEEL" characteristics for the rapid removal of the film from high gloss to semi matt surface, such as glossy painted metals. The removal Forces is inversely proportional to the speed of removal OUTLINES UNIT Film type polyethylene (LDPE) UV Treated 80 MIC Black / White, Black / Black Average Thickness (A.S.T.M) Colour