Bridge hinge C-AD 105
Group of right and lift handed hinge made of aluminum, screws and pin are stainless steel Used for joint frame with opining shutter of door Capacity of 2 hinges 100kg
Finishing: painted in RAL colors
Reviews (0)
Related products
Hinge door handle C-AD 101
Double handle with die-cast aluminium shaft, It has an easy moving cover screws case, planned for the ambidextrous rotation without any modification, Different solutions available for the assembling: with auto threading screws or with the use of metrical screws and rivets. The double internal recovery spring assures a perfect horizontal alignment. Die-cast aluminium handle, box,
cover box and rotor in zamak.
Zinc-coated steel spring;
derlin anti-friction bushes.
Finishing: painted in RAL colors
LOCKING KIT C-AD 110
Kit for use in conjunction with window Cremone bolts and the kit has all the components needed for the frame fastening device.
This kit converts the window Cremone bolts into a Cremone bolt for inward opening designs. The kit is complete with all the components (2 blocks, 2 end-pieces and 2 keeps) needed for the frame fastening device.
NYLON (FINGER CATCH) C-AD 121
Nylon catch has soft and rounded shapes and easy ringing nylon grip. Equipped with of an exclusive fixing system that helps the correct placing of the body and the counter plate. Perfect use on complanate and surmount (+7mm) systems with the 2 counter plates. Additional thicknesses of 1,2,3 mm compatible with both counter plates (usable for surmount systems till 13mm). Nylon body. counter plates and thicknesses; tempered steel helical spring; black galvanized steel fixing screws 03,5 TSPC CR.
Nylon ratchet "RING" is universal for the PVC, WOOD, ALUMINIUM AND WOOD-ALUMINIUM profiles. It is also adaptable for the surmount systems (15-28mm).
Prodaction tape
APPLICATIONS
Temporary protection of surfaces, during medium and severe mechanical transformations of the following materials: Brushed aluminium, ground or deep drawing stainless steel, matt painted coils and PVC profiles/plates.
Not suggested for Copper, brass and copper containing alloys. Not suitable for protection against corrosion, humidity or chemical solvents.
SUITABLITY
suitable for POWDER COATED ALUMINIUM PROFILES ADLER N-2R exhibits the special "EASY-PEEL" characteristics for the rapid removal of the film from high gloss to semi matt surface, such as glossy painted metals.
The removal Forces is inversely proportional to the speed of removal
OUTLINES
UNIT
Film type
polyethylene (LDPE) UV Treated 80 MIC Black / White, Black / Black
Average Thickness (A.S.T.M) Colour
Two Directional Lever Bolt C-AD 119 D
Applications
Two directional lever bolt extremely strong suitable
also on door of new design.
Characteristics
Useful travel 18mm With lever operation it is possible to transmit a force of up 180 kg to the rod.
It is flush-mounted and can accommodate indistinctly
sliding rods dia-meter 6mm or 8mm because it is already fitted with a dual threading diameter.
Parts supplied
2 black stainless steel 7P 1/2" flat head c/sunk screws.
Materials
Die-cast zamak body and lever hardened steel springs.
Finishing: Painted in RAL colors
Two wings (Flash base hinge) C-AD 103
Tow-wing hinge made from aluminum, extrusion to fit in euro grove profiles the coun-terplates, screws and pin are stainless steel while the bush is made from self-lubricating nylon it is ready-assembled right or lift and so easy to fit to the wing Capacity of 2 hinges, 80kg
Finishing: painted in RAL colors
Reviews
There are no reviews yet.